30,000 psi Hydrostatic Test Stand

The Chant Engineering Model 10891-01, 30,000 psi Hydrostatic Test Stand is used to test high pressure valves and other products.

This semi-automatic Test Stand includes a 48” wide operator Control Console with a Touch Screen display and a 24” Monitor & two ballistic enclosed test areas. One enclosure is for Water/Glycol testing of products & the other is for Hydraulic testing. Complete data acquisition of all testing is achieved with Chant DataTest© software.

The hydraulic power source consists of a 20 GPM, 5000 Psi hydraulic pump driven by a 75 HP electric motor. The oil (ISO-32) is supplied from the 90 gallon steel reservoir. The reservoir, the pump, valves, filters, flow meter and heat exchanger are all contained on one common skid.

The Water/Glycol power source consists of an 8.4 GPM, 15,000 Psi or 2 GPM, 30,000 Psi water pump driven by a 100 HP electric motor. The ethylene glycol is supplied from the 90 gallon stainless steel reservoir. The reservoir, the pump, valves, filters, flow meter are all contained on one common skid. 10891-01 Water/Glycol & Hydraulic Test Stand Specifications


Dimensions:

  • 172” L x 74” H x 36” W (Assembled Total Length)
  • 48” L (Control Console)
  • 62” L (Water/Glycol & Hydraulic Console – ea.)

Weights

  • Total system - 9000 lb.

Electrical:

  • 480 VAC, 3 PH, 60Hz, 141 FLA, SCCR 5KA

Pressure:

  • Hydraulic: 300 – 5,000 Psig
  • Water/Glycol: 3,000-30,000 Psig

FLOW:

  • Hydraulic: 20 GPM
  • Water/Glycol: 8.4 GPM – 15,000 psi
  • Water/Glycol: 2 GPM – 30,000 psi

Fluid:

  • Hydraulic Oil ISO-32
  • Water/Glycol Water Ethylene Glycol

Utility Air:

  • Compressed Air – 100 psig

Reservoirs:

  • 90 Gallon Steel Reservoir - Hydraulic fluid
  • 90 Gallon Stainless Steel Reservoir – Water/Glycol

Motors:

  • 75 HP - Hydraulic
  • 100 HP – Water/Glycol