Universal Hydraulic Test Stands

Model 965801 - Universal Hydraulic
152 Model 9736909 - Universal Automatic Hydraulic
96” wide test bench
with (1) 21” touchscreen monitors Model 97371008 - Universal Hydraulic
107 10228 	Universal Hydraulic
80
Chant Engineering now offers three Universal Hydraulic Test Stands used for testing relief valves, cylinders, hydraulic pumps, hydraulic motors, selector valve assemblies and hoses.

The Model 965801, Model 9736909, Model 97371008 and Model 10228

Chant 965801 Universal Hydraulic Test Stand

The Chant Engineering Universal Hydraulic Test Stand comprises a Test Stand Console, Hydraulic Power Supply, Chiller Unit, Dynamometer Lubrication Unit, Motor Control Center, and Remote PLC.

The Chant Engineering Engineering Universal Hydraulic Test Stand comprises a Test Stand Console, Hydraulic Power Supply, Chiller Unit, Dynamometer Lubrication Unit, Motor Control Center, and Remote PLC. The Test Stand console includes a 152” long test sink with a splashguard, pump test station and variable speed drive (VSD), motor test station and dynamometer (DYNO), (8) pressure test ports, (5) return test ports, (2) DC power connection ports, temperature control, and sump.

Located along the front edge of the console are all the necessary controls to start the multiple hydraulic pumps, and control pressures and flows to all the test ports. Digital indicators located above the test sink display all pressures, flows, speeds, torques and temperature in order to accurately measure parameters of the units under test (UUT).

Chant 965801 Specifications:
Dimensions: 159" L x 78" H x 84" W
Weight: 7,000 lbs
Electrical: 460 VAC, 3 PH, 60Hz, 15-amp circuit
Electrical: 115 VAC, 1 PH, 60Hz, 40-amp circuit
Pressure: 5,000 PSI, 10,000 PSI STATIC, 90 PSI AIR

Hydraulic Power Supply
Dimensions: 115" L x 96" W
Weight: 10,000 lbs
Electrical: 460 VAC, 3 PH, 60Hz, 425-amp circuit
Pressure: 5,000 PSI
Air Pressure: 90 PSI
Flow: 60 GPM Max
Horse Power: 300

Motor Control Center
Dimensions: 60" L x 13" W
Weight: 1,000 lbs
Electrical: 460 VAC, 3 PH, 60Hz, 710-amp circuit

Remote PLC
Dimensions: 20" L x 10" W
Weight: 45 lbs
Electrical: 115 VAC, 1 PH, 60Hz, 4-amp circuit

Chiller
Dimensions: 108" L x 90" W
Weight: 3,000 lbs
Electrical: 460 VAC, 3 PH, 60Hz, 90-amp circuit

Pump System
Dimensions: 73" L x 60" W
Weight: 2,000 lbs
Electrical: 460 VAC, 3 PH, 60Hz
Pressure: 150 PSI
Flow: 60 GPM


Chant 9736909 Universal Automatic Hydraulic Test Stand

Chant Engineering Model 9736909, Universal Automatic Hydraulic Test Stand is used for testing aircraft control components.

Chant Engineering Model 9736909, Universal Automatic Hydraulic Test Stand is used for testing aircraft control components. The Test Stand Console consists of a 96" wide test bench with (1) 21" touchscreen monitors and CPU, splashguard, high speed Variable Speed Drive, and test sink with Oil Supply Ports, Return Ports, Temperature Control, and Sump.

Located along the panel of the console are all the necessary controls to start the multiple hydraulic pumps and control pressures and flows to all the test ports. Displayed on the monitor are all pressures, flows, speeds, torques and temperatures in order to accurately measure parameters of the units under test (UUT).

The reservoir, the pumps, valves, filters, heaters and heat exchanger are all contained in one common rear service enclosure.

The main reservoir contains immersion heaters for heating the hydraulic oil and a water cooled heat exchanger to cool the hydraulic oil. The operator can specify a temperature setpoint on the monitor to which the water cooling or heaters will engage as needed to reach and maintain the temperature setpoint.

There is a variable speed motor which provides adjustable speed up to 14,000 rpm for testing pump devices.

Chant 9736909 Specifications:
Dimensions: 96" L x 77" H x 60" W
Weight: 3,200 lbs.
Electrical: 460 VAC, 3 PH, 60Hz, 125-amp circuit
Pressure: 3,000 PSI Hydraulic supply, 90 PSI Air


Chant 97371008 Universal Hydraulic Test Stand

Chant Engineering Model 97371008, Universal Automatic Hydraulic Test Stand is used for testing aircraft control components.

Chant Engineering Model 97371008, Universal Automatic Hydraulic Test Stand is used for testing aircraft control components. The Test Stand Console consists of a 107' wide test bench with two 15" monitors and CPU, splashguard, high speed Variable Speed Drive, and test sink with Pressure and Return Test Ports, DC Power connection, Temperature Control, and Sump.

Located along the panel of the console are all the necessary controls to start the multiple hydraulic pumps and control pressures and flows to all the test ports. Displayed on the monitor are all pressures, flows, speeds, torques and temperature in order to accurately measure parameters of the units under test (UUT).

The reservoir, the pumps, valves, filters, heaters and heat exchanger are all contained in one common enclosure with rear access for easy maintenance and service.

The main reservoir contains immersion heaters for heating the hydraulic oil and a water cooled heat exchanger to cool the hydraulic oil. The operator can specify a temperature setpoint on the monitor to which the water cooling or heaters will engage as needed to reach and maintain the temperature setpoint.

Chant 97371008 Specifications:
Dimensions: 107" L x 60" H x 48" W
Weight: 2,500 lbs.
Electrical: 460 VAC, 3 PH, 60Hz, 40-amp circuit
Electrical: 115 VAC, 1 PH, 60Hz, 15-amp circuit


Chant 10228 Universal Hydraulic Test Stand

Model 10228 Hydraulic Test Stand is used to bench test, repair and troubleshoot all LAV family of vehicles hydraulic equipment as well as other vehicles such as MK-48, MK-17, AAV, M-88 Hercules hydraulic components.

Model 10228 Hydraulic Test Stand is used to bench test, repair and troubleshoot all LAV family of vehicles hydraulic equipment as well as other vehicles such as MK-48, MK-17, AAV, M-88 Hercules hydraulic components.

The Test Stand Console consists of a 80" long x 30" wide test area with a touch screen display, 150hp variable speed electric drive (VSD), 40hp hydraulic power unit (HPU), a 24 volt/30 amp variable DC power supply and test connection, a 110 volt/30 amp AC electrical test connection, and an enclosed test sink area with hydraulic Test Ports. Located along the front panel of the operator’s console are all the necessary controls and indicators to start the hydraulic pump, and control pressures and flows to all the test ports. The touch screen displays VSD-RPM, Oil Temperature (OF) and Flow (GPM). Also located on the console are analog pressure gauges to measure the parameters of the Unit Under Test (UUT).

The hydraulic power source consists of a 10 GPM, 5000 psi hydraulic pump driven by a 40 HP electric motor. The oil (designed for MIL-PRF-6083F, QUAL-H-6032, SPO 45-00-0-0407-0016) is supplied from the 40 gallon Main Reservoir tank & a 30 gallon elevated pressure tank.

The reservoir, the pump, valves, filters, flow meter and heat exchanger are all contained in one common area within the enclosure and can be accessed from the various panel locations.

Test ports are all located within the enclosed sink area and are used to connect the hydraulic systems which are used to test the integrity and functionality of the UUT.

Chant 10228 Specifications:
Dimensions: 80" L x 80" H x 80" W
Weight: 8,200 lbs
Electrical: 440 VAC, 3 PH, 60Hz, 240FLA, SCCR 5KA
Pressure: 5,000 PSI
Flow: 10 GPM
Water: 15 GPM @ 50° F
Hydraulic Fluid: MIL-PRF-6083F, QUAL-H-6032 or SPO 45-00-0-0407-0016
Reservoir: 40 Gallons
Pressure Tank: 30 Gallons
High Pressure Pump: 5,000 psi
Heat Exchanger: water system – 200,000 BTU heat removal per hour
Electrical: AC Power Supply: Voltage 110 Volts, 30A
DC Power Supply: 0-30 Volts, 0-30A
Waste Tank: 5 Gallon Tank for hydraulic waste fluid
Jib Crane: 800 Lbs Capacity